Unika TD-14000, User Instructions

Page: 3 / 18


During long periods of non-use, disconnect the unit’s main power.

Always mount this unit in a safe and stable manner.

Power cords should be routed so they are not likely to be walked on, pinched by
items placed upon or against them.

Cleaning -The outside of the unit should be wipe down with a soft cloth and mild
cleaner when needed.

Heat -The amplifier should be situated away from heat sources such as radiators,
heat registers, stoves, or other appliances (including amplifiers) that produce heat.

The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a marked change in
performance.
Precautions Introduction
Front Panel Rear Panel Operation and Performance
AMPLIFIER
TD
-
14000
Introduction
Congratulations and thank you for purchasing TD14000 amplifier. This amplifier is a
representation of UNiKA’s continuing commitment to produce the best and highest quality
audio products at an affordable price. These amplifiers are designed to provide a big
impact in sound reproduction. Please read and understand this manual completely
before attempting to operate your new amplifier. This booklet contains important
information concerning the proper and safe operation of your new amplifier.
Unpacking:
Every TD14000 amplifier has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the shipping carton
for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your unit for any damage and be sure all accessories
necessary to operate the system have arrived intact. In the event damage has
been found or parts are missing, please contact your dealer for further
instructions.
Installation:
This amplifier is designed to mount into a standard 19”rack. The
front panel provides four holes used to screw the unit into a rack. The unit also
provides a way to rear mount the unit into a rack for added security. Rear mounting
the unit is especially recommended if the unit is to mounted into a mobile rack.
2