5
UNiKA NBB-04R / NBB-04T
User Guide
Getting Started Guide
Setting
•
A
ll the routing assignment and device configuration are set via Dante Controller
software which is available free from the following Audinate webpage,
www.audinate.com/products/software/dante-controller
•
User's guide of Dante Controller can be found on the following webpage,
www.audinate.com/resources/technical-documentation
Besides the routing assignment, mostly,
you should set the operating sample rate
of your NBB-04R/NBB-04T to meet sample rate of your whole Dante network.
Basically, all the devices in the same Dante network should be synced to the same
sample rate. You do not need to worry about the bit-depth of coding of your audio
stream in network. Although the NBB-04R/NBB-04T encodes/decodes audio in 24-
bit PCM stream, it automatically does bit-depth converting when it streams audio to/
from other Dante-enabled devices manipulating audio data in different bit-depth.
Once your NBB-04R/NBB-04T is powered, you can configure your NBB-04R/NBB-
04T by direct connecting it to your computer or via the Ethernet switch. That is to
say that the NBB-04R/NBB-04T can talk to your computer directly or via switch.
See picture below for an illustration.
Notebooks running
Dante Controller
Summary of Contents for NBB-04R
Page 2: ......
