GX-3000 FRONT PANEL
1. Racking Mounting Ears -
Two front panel mounting holes are provided
on each mounting ear.
2. UNiKA Logo and Model No -
GX series have 1 type of 2U model
GX-3000 and 3 types of 3U models GX-4000 / GX-5000 / GX-7000.
3. Channel 1 Signal Indicators -
These green and yellow LEDs will glow
according to the average signal output.
4. Channel 1 Clip Indicator -
This red LED will begin to flash when the
channel begins to overload (clip), at this point the channel will begin to
distort. Under heavy clipping activity lower the channel's gain control to
reduce the risk of damage to your speakers and amplifier. This LED may
glow when the unit has been turned off, this is normal.
5. Channel 1 Protect Indicator -
The red Protect LED will begin to glow
when the channel goes into protect mode. When the channel goes into
protect mode all output for that channel will turn off. This is to protect
any speakers connected to the channel.
6. Channel 1 Limiter Switch -
This is used to activate the channel's built
in limiter. The limiter reduces the average input level when the signal
begins to distort, this process is designed to reduce distortion and
protect the speakers. See limiter at page 15.
7. Function Indicators -
These indicators detail the operating mode of the
amplifier. These LEDs will also function as a power indicator.
8. Channel 2 Limiter Switch -
This is used to activate the channel's built
in limiter. The limiter reduces the average input level when the signal
begins to distort, this process is designed to reduce distortion and
protect the speakers. See limiter at page 15.
page 3
Introduction
Rear Panels Set Up Speakon Assembly Operating Modes Protection Features Specifications
Front Panel
UNiKA
GX-3000/GX-4000/GX-5000/GX-7000
LIMITER
ON
LIMITER
ON
-
20dB
SIGNAL
-
10dB CLIP PROT
CH-1
CH-2
0
10
0
10
ON
OFF
PROT CLIP
-
10dB
-
20dB SIGNAL
PARALLEL STEREO
BRIDGE
GX-3000
UNiK A
PROFESSIONAL PRODUCTS
Figure
1
8
7
6
5
4
3
12
10
1
1
1
9
2
13
14
15
