28
DSP Audio Processor
Out 1 Mixer:
Input D: -6.25dB
CH.UP or CH.DOWN
(pressed to select items)
ITEM UP or ITEM DOWN
(pressed to select items)
Rotary Encoder
(Rotated to select items)
Rotary Encoder
(pressed to access)
Press either one of the
keys to cycle through
to the Input or Output
channel to be configured
Press either one of the
keys to cycle through the
parameters of the selected
channel
Rotate the encoder to change the
value of the parameter
Output Channel
Select Output 1 to 8
Gain
Rotate the encoder to Mute the
channel or adjust from -48dB to
+12dB
Delay
Adjust the Delay from 0ms to
2000ms in 0.03ms/step
Press the encoder to
change the time delay
Unit as Meter, Millisecond
or Feet
Low-Pass Filter
●
Adjust the cutoff Frequency from
50Hz to 20KHz
●
Turn ON/OFF the LPF
●
Select filter type:
1-Butterworth 6,12,18,24dB/oct
2-Bessel 6,12,18,24dB/oct
3-Linkwitz Riley12,24dB/oct
Press the encoder to
select Frequency, Filter
Type or enable ON/OFF
the low pass filter
High-Pass Filter
●
Select the cutoff Frequency from
20Hz to 20KHz
●
Enable ON/OFF the HPF
●
Select filter type:
1.Butterworth 6,12,18,24dB/oct
2.Bessel 6,12,18,24dB/oct
3.Linkwitz Riley12,24dB/oct
Press the encoder to
select Frequency, Filter
Type or enable ON/OFF
the high pass filter
Mixer
Rotate the encoder to adjust the
level of the selected input channel
that mix into the output channel
Press the encoder to
select Input A, Input B,
Input C or Input D
(Table-4)
The
CH.UP & CH.DOWN
keys and the
ITEM-UP & ITEM-DOWN
keys
