UNIHOMS T8E, Product User Manual

Page: 8 / 20

Chapter 4 Installation instructions
● Turn off the main power in the electricity box and confirm
the live wire is
not alive with a test pencil.
● Check the wires and make sure the wires are in good
contact with the terminals and no exposed copper wires.
● Seperate the back base from panel by built-in magnetic
force (as shown in the pictures following).
● Connect the live wire to terminal L and neutral wire to
terminal N.
● Fasten the base to the wall box with mounting screws and
fix the smart panel back to the base by built-in magnetic
force.
● Note that the screws should not be fixed too tight during
installation in case any deformation or damage to the screen
and hardware.
● If your smart panel is not flat after installation, do not press
the screen violently, please check the wall box and the base
installation at first.