Unihedron
SQM-LU Users manual
Command
Description
rx
Reading request
cx
Calibration information request
ix
Unit information request (note lower case “i”)
zcalAx
Arm Light Calibration command
zcalBx
Arm Dark Calibration command
zcalDx
Disarm Calibration command
zcal5
#####
###
x
Manually Set Light Calibration Offset
zcal6
#####
###
x
Manually Set Light Calibration Temperature
zcal7
#####
###
x
Manually Set Dark Calibration Time Period
zcal8
#####
###
x
Manually Set Dark Calibration Temperature
0x19
Reset microcontroller (see bootloader). Hexadecimal value 19.
:
Intel Hex firmware upgrade initiation (see bootloader)
P
########
x
Set period (in seconds) for interval reporting to EEPROM and RAM for booting
and immediate use. Firmware feature=13.
p
########
x
Set period (in seconds) for interval reporting to RAM for immediate use.
Firmware feature=13.
T
########
x
Set threshold (in mag/arcsec
2
) for interval reporting only to EEPROM and RAM
for booting and immediate use. Firmware feature=13.
t
########
x
Set threshold (in mag/arcsec
2
) for interval reporting only to RAM for immediate
use. Firmware feature=13.
Ix
Request interval settings (note upper case “I”). Firmware feature=13.
Table 1: Command summary
Revision 1.1
Page 7
Last modified: Jun 18, 2011
