UniGuard Technology Limited
www.uniguardgps.com
1. Installation Figure
Please insert a SIM Card (with GPRS, SMS and Caller ID display
service) into UT06, and connect it to OBD II interface of the Vehicle
directly. Please check the device status through LED light after power on:
LED indicates Power, it should be on when the vehicle is started.
LED indicates status of Signals.
Flashing per one second which indicates GSM registers
successfully.
Flashing per three seconds once which indicates GPS is
obtaining orientation
It is still on which indicates GSM has registered and GPS has
obtained the orientation. It’s working well.
If it is on for 0.1 second then off for 0.1 second more than 3
minutes, please make sure SIM card inserted well. Without SIM card, the
device cannot work.
2. SMS Operation Instruction
SMS Format: A******,cmd,param1,param2…
1. ******is the password, Initial Password is 000000
2. cmd is the command ID.
3. Param is the command parameter. Different cmd use
different parameters. All the parameters must use half-angle
symbol. Wrong SMS format or wrong password, it will not
respond.
