Unigas P75R, Manual Of Installation - Use - Maintenance

Page: 32 / 135

PART III: OPERATION
32
The display will show these data:
The display will show these data:
Setting menu
The setting menu is divided into different blocks:
The accesses to the various blocks are allowed by passwords. Passwords are divided into three levels:

User level (info): no password needed

Service level (Service)

Manifacturer level (OEM)
PHASES LIST
During operation, the following program phases are shown. The meaning for each phase is quoted in the table below
Keys (+ & - )= ESC
By pr and - at the same time, the ESCAPE function is perfomed:
to enter a lower level menu
Bloc. Descrizione Description Password
100 Informazioni generali General OEM / Service / Info
200 Controllo bruciatore Burner control OEM / Service
400 Curve rapporto Ratio curves OEM / Service
500 Controllo rapporto Ratio control OEM / Service
600 Servocomandi Actuators OEM / Service
700 Storico errori Error history OEM / Service / Info
900 Dati di processo Process data OEM / Service / Info
Fase /Phase Funzione Function
Ph00 Fase blocco Lockout phase
Ph01 Fase di sicurezza Safety phase
Ph10 t10 = tempo raggiungimento posizione riposo t10 = home run
Ph12 Pausa Standby (stationary)
Ph22
t22 = tempo di salita ventilatore (motore ventilatore = ON,
valvola intercettazione di sicurezza = ON) t22 = fan ramp up time (fan motor = ON,
safety shutoff valve = ON)
Ph24 Verso posizione preventilazione Traveling to the prepurge position
Lock+unlock codes
Flame
Open valves
Fan motor energised
Oil pre-heater energised
Ignition transformers energised
Plant heat request
Parametere setting mode
Info mode
Service mode
Closing actuator
Opening actuator
Unit measure