C.I.B. UNIGAS - M039134CD
28
Removing the electrodes
z
Remove the combustion head (see “Removing the combustion head” on page 25).
z
Withdraw the screw
VE
and remove the electrodes from the support (Fig. 47 - Fig. 48).
Disassembly of the nozzle mod. LO280
z
Loose screw V that fasten the combustion head and remove the head from the nozzle holder (Fig. 49 - Fig. 50).
In order to remove the nozzle, it is important to use two wrenches as shown in , to avoid damaging the burner component plate!
z
Replace the combustion head paying attention to the position
A
measured before, remembering to fasten screw
V
.
Fig. 47 -
Double-stage burner
Fig. 48 -
Single-stage burner
Fig. 49
Fig. 50
VE
VE
V
