PART I: INSTALLATION MANUAL
11
AIR RATE SETTING
ADJUSTING THE COMBUSTION HEAD
The burner is set in the factory with the combustion head in the "MAX." position, corresponding to the maximum output. To ope-
rate the burner at a lowest output, drive the combustion head back towards the "MIN.” position, rotating the screw VRT
clockwise.
G18 SP
Fig. 15
PG25 SP - PG30 TN
Fig. 16
G18 SP
Loose the screw VBS and rotate the air damper in the desired
position, to set the air flow.
At the end of settings, tight the screw VBS.
Fig. 13
PG25 SP - PG30 TN
Loose the screw VBS and set the air flow, working directly on
the air damper.
At the end of settings, tight the screw VBS.
Fig. 14
VBS
VBS
VRT
Summary of Contents for G18 SP
