PART II: INSTALLATION
24
1. Connection for manometer 1 – delivery (M1) – G1/4
2. Connection for manometer 2 – suction (M2) – G1/4
3. Connection for manometer 3 (M3)
A. Suction connection– G1/2
D. Direct - clockwise
I. Indirect – counter clockwise
R. By-pass connection– G1/2
S. Delivery connection – G1/2
VR. After removal of cover screw: pressure regulation
Connecting the oil flexible hoses to the pump
To connect the flexible oil hoses to the pump, proceed as follows, according to the pump provided:
1 remove the closing nuts A and R on the inlet and return connections of the pump;
2 screw the rotating nut of the two flexible hoses on the pump
being careful to avoid exchanging the lines
: see the arrows marked
on the pump.
For further information, refer to the technical documentation of the pump.
.
Diesel filters
Suntec E..
Suntec TA
HP Technik UHE-A
2
2
A
A
R
S
D
I
VR
VR
1
3
R
A
R
A
R
A
Item
Note
Connection
Max. operating
pressure
Max. operating
temperature
Filtering
degree
Protec-
tion
5
20151PE (*)
-
3/8”
1 bar
-20, 60 °C
100 μ
-
6
20201PL (*)
-
3/8”
1 bar
-20, 60 °C
100 μ
-
7
GA70501
-
1”
4 bar
90 °C
100 μ
IP65
(*) Supplied per pilot diesel fuel if present