Unify OpenStage M3 EX Operating Instructions Manual Download | Manualshive

Page: 12 / 130

background image

Putting the handset into service

11

Putting the handset into service

Checking the package contents

• Handset
• Battery pack
• Accessory pack containing the following:

– Battery cover
– Screw for battery cover
– Allen key
– Attachment clip
– Holder for attachment clip
– Dummy plug (OpenStage M3 and OpenStage M3 Ex only)
– Connector with cord for man down alarm (OpenStage M3 Plus and

OpenStage M3 Ex Plus only)

• Document "Information on Handset"
• Document "Safety Notes"

Removing the protective cover

Installing the charger

The charger is designed for operation in closed, dry rooms within a temperature
range of +5 °C to +45 °C.

Position the charger on a level, non-slip surface.

The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.

1. Connect the flat plug from the power adapter to the charger.
2. Plug the power adapter into the plug socket.

Remove the protective cover from the display be-
fore putting the handset into service.

Please note

:

• Never expose the telephone to the influence of heat sources, direct

sunlight or other electrical devices.

• Protect your handset from moisture, dust, corrosive liquids and fumes.

«
...
10
11
12
13
14
...
»

Summary of Contents for OpenStage M3 EX



































































































































Reviews:

No comments

Related manuals for OpenStage M3 EX

Brand: Hama Pages: 12

Brand: NEC Pages: 2

Brand: NEC Pages: 4

Factor SPH-M260

Brand: Samsung Pages: 118

Brand: Samsung Pages: 2

Brand: Samsung Pages: 34

Brand: Galaxy Pages: 58

Brand: Talkswitch Pages: 29

Brand: Talkswitch Pages: 3

Brand: Samsung Pages: 170

Brand: Dash Pages: 24

Brand: Klein Electronics Pages: 2

Brand: DISPLAY GREATNESS Pages: 35

Brand: Yuxin Pages: 42

Brand: Audiovox Pages: 52

Brand: Tunstall Pages: 118

Brand: PCD Pages: 73

Brand: Konftel Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands