Unify OpenStage M3 EX Operating Instructions Manual Download

Page: 114 / 130

Personal alarm functionality

113

Monitoring LED

The monitoring LED visually indicates the following PNG operating states:

Language support in Additional Features menu

The Additional Features menu is only available in German and English.

If you choose a language other than German when setting the language, the dis-
play output in the Additional Features menu will be in English.

Alarm types (overview)

Monitoring Off:

continuously off

Monitoring On:

flashing, 50 ms on/1000 ms off

Prealarm Active:

flashing, 500 ms on/500 ms off

Alarm:

continuously on

Technical Warning:

continuously on

Automatic Alarm Off:

flashing, 500 ms on/2000 ms off

Alarm Type

Explanation

Manual personal alarm

Triggered by pressing the red alarm key on the

handset.

Automatic personal alarm

Triggered independently by the handset after a

specific time if a defined event occurs and the pre-

alarm (see below) was not confirmed by the person

in question:

• Person no longer moving (Non Movement)
• Person falls (Man Down Alarm)
• Person does not respond to the prealarm which

is signalled if there is no input on the handset for
a configurable period (Time Alarm)

• Person loses the handset (Pull Cord Alarm; with

pull cord)

• Person is moving frantically (Escape Alarm)
The particular alarms that are activated on your

handset depend on your handset's PNG configura-

tion. Response times, prealarm times and acoustic

alarm signals can likewise be set on the handset.
The settings must be performed before the hand-

set is commissioned initially.

Technical warning

If a technical fault occurs on the handset, for exam-

ple low battery charge, you will hear an error tone.

Prealarm

The prealarm sounds before an automatic person-

al alarm. If the prealarm is confirmed within a cer-

tain time by the user, the automatic personal alarm

is not triggered.

Summary of Contents for OpenStage M3 EX



































































































































Search results

Summary of Contents for OpenStage M3 EX

Reviews:

Related manuals for OpenStage M3 EX

Brands by name

Popular brands

Unify OpenStage M3 EX, Operating Instructions Manual

Search results

Summary of Contents for OpenStage M3 EX

Reviews:

Related manuals for OpenStage M3 EX

Brands by name

Popular brands