manualshive.com logo in svg

Unify OpenStage 40 T, User Manual, Page: 53 / 110

Share
Download
Unify OpenStage 40 T User Manual Download Page 53

Enhanced phone functions

53

Accepting a second call and connecting it to the conference

If you receive a second call during the conference 

 page 47, you can connect 

this party to the conference.

Prerequisite:

 You are conducting a call in a conference and receive a second 

call.

Z

An alert tone is audible.

T

Press the "Pickup" sensor key.

or

Only if a "Pickup" sensor key is not configured:

Confirm the option shown.

[

You are immediately connected to the second caller. The conference partici-
pants are placed on hold.

Select and confirm to connect the second call to the conference.

Transferring a conference

Each party can transfer the conference to a third party whom they have called 
via a consultation call or via the "Add to conference?" function. This party is not 
a participant in the conference at this point. The conference cannot be trans-
ferred to a second call.

Prerequisite:

 You are in a conference.

Confirm the option shown.

 

Select and confirm the option shown. The conference participants are placed on 
hold.

j

Call a party.

or

Confirm the option shown.

Confirm the option shown.

j

Call a party and announce the transfer.

Select and confirm the option shown.

You have left the conference.

\

Replace the handset.

Answer camp-on?

Conference?

Conference 

g

Consultation?

Conference 

g

Add to conference?

Transfer conference?

Summary of Contents for OpenStage 40 T















































































































Reviews:

No comments