background image

Glossary

 A31003-C1000-M102-5-76A9, 09/2017

182

OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual

  

  

  

bkglos.fm

DTMF

D

ual 

T

one 

M

ulti 

F

requency. A means of signaling between a phone and e. g. a voicemail 

facility. The signals can be transmitted either in-band, i. e. within the speech band, or out-
band, i. e. in a separate signaling channel.

E

EAP

E

xtensible 

A

uthentication 

P

rotocol. An authentication framework that is frequently used in 

WLAN networks. It is defined in RFC 3748.

F

FTP

F

ile 

T

ransfer 

P

rotocol. Used for transferring files in networks, e. g., to update telephone 

software.

G

G.711

ITU-T standard for audio encoding, used in ISDN and -> VoIP. It requires a 64 kBit/s band-
width.

G.722

ITU-T standard for audio encoding using split band -> ADPCM. The audio bandwidth is 7 
kHz at a sampling rate of 16 kHz. There are several transfer rates ranging from 32 to 64 
kBit/s, which correspond to different compression degrees. The voice quality is very good.

G.729

ITU-T standard for audio encoding with low bandwidth requirements, mostly used in VoIP. 
The standard bitrate is 8 kBit/s. Music or tones such as -> DTMF or fax tones cannot be 
transported reliably with this codec.

Gateway

Mediation components between two different network types, e. g., -> IP network and ISDN 
network.

H

HTTP

H

yper

t

ext 

T

ransfer 

P

rotocol. A standard protocol for data transfer in -> IP networks.

Summary of Contents for OpenSpace CP600






























































































































































































Reviews: