PNG Configuration
A31003-G2100-S100-2-7620, 03/2014
26
PNG Configuration for Gigaset M2
plus
and M2 Ex professional, Service Manual
SHB_PNG07.fm
Alarm Configuration
7.2.2
Emergency/Emergency key
This section contains information on configuring the settings for the deliberate alarm, that is,
the alarm triggered by the emergency key.
An alarm can be triggered by pressing the emergency key once the PNG function is active on
the handset (see Section , “Activating the PNG Functionality on the Handset”) and an alarm
destination has been configured for this alarm type. Monitoring mode must not be activated for
this (
Add. Features
->
PNG Activation
menu).
The parameter "PNEZ Basis" must be disabled for operation without PNEZ (see Section 7.2.1,
“General Settings”) so that the alarm can be deactivated on the handset.
7.2.2.1
Alarm Signal
This parameter enables you to specify whether an alarm or positioning signal is generated by
pressing the handset’s emergency key when an alarm is triggered.
The following parameters can be configured:
You can use the "Alarm Signal: Longpress" setting to generate an alarm with or without an
alarm signal, depending on the situation:
●
Pressing the emergency key briefly generates an alarm with an alarm signal.
●
Pressing and holding down the emergency key generates a silent alarm.
This alarm can be signalled at a separate alarm destination: "Alarm destination lp".
Menu item
Description
Alarm Signal: On
●
An alarm signal sounds on the handset
●
An alarm call is signalled at the alarm destination
Alarm Signal: Off
●
An alarm signal does not sound on the handset
●
An alarm call is signalled at the alarm destination
Alarm Signal: Longpress
When the emergency key is briefly pressed:
●
an alarm signal sounds on the handset
●
an alarm call is signalled at the alarm destination
When the emergency key is pressed and held down:
●
an alarm signal does not sound on the handset
●
an alarm call is signalled at the "Alarm destination lp"
Table 7-8
Alarm signal values (on/off/longpress)
