SAS to SAS/SATA JBOD Subsystem
User Manual
21
2.2.2 Installing 2.5” Disk Drive in a Disk Tray
1.
Remove an empty disk tray from the subsystem.
2.
Place the disk drive in the disk tray. Turn the disk tray upside down. Align the
four screw holes of the disk drive in the four
Hole w
of the disk tray. To
secure the disk drive into the disk tray, tighten four screws on these holes of
the disk tray. Note in the picture below where the screws should be placed in
the disk tray holes.
