NVR Quick Start Manual
第
8
页 共
22
页
A –Area
is cameras IP address searching area——click
Search
to get the camera IP addresses in
LAN
B- Area
is camera IP address modification area——double click IP camera in A area, B area will
show camera network data, some cameras can change IP address directly in B area
C- Area
is cameras channel setting area——according to the selection sequence in A zone, to
sort the 1-36 channels image order. Select
All
to add IP cameras to the all channel by one click.
D-Area
is camera user name and password filling area——this area is camera network parameter
6.2.2 Automatic Search
Right click to select
【
IP channel Setting
】
Auto
If the IP camera has private protocol with NVR, NVR will assign IP address to the camera automatically,
after finish the searching, will connect the image automatically. Camera IP addresses will be added
automatically in the preview channel area.
6.3 Preview
6.3.1 Drag and Drop the Image
The preview image location can be drag and drop to different place as necessary, but the channel
physical address will keep the same(ATTN: channel number in red circle as below)
Preview image can randomly drag to adjust according to actual management requirement, which
makes surveillance management more systematic and friendly.
6.3.2 Drag to Change Channel Sequence
During real video surveillance, it’s very important to have
preview channel position of IPC image.Simple image dragging
could not meet the need of multi-channel simultaneous playback
and it’s frustrating to match channel position respectively
when searching. Dragging channel sequence can better solve this
problem.