UniFlow NTware MiCard, Instruction Manual

Page: 16 / 22

MiCard Magnetic Card Reader
4
•
Code Conversion No. [N]:
Specifies the code conversion that has to be applied to the ID read in a series of
code conversions at step [N]. The results of the code conversions at step [N] are
displayed next to the name of the selected code conversion in the drop down list.
If the result is empty "()", this code conversion cannot be applied in the actual
step.
After a code conversion step [N] has been saved by clicking the Save button the
configuration page will be allowed to specify code conversion step [N+1].