UniFlow NTware MiCard, Instruction Manual

Page: 14 / 22

MiCard Magnetic Card Reader
2
4.1 Usage
1.
To read a card, swipe it through the reader slot in either direction, with the
magnetic stripe facing the magnetic head.
2.
While swiping the card through the reader slot, the LED will go off.
3.
Once the magnetic stripe has been read, the LED will light up green to indicate a
good reading result. If no good result has been obtained, the LED will light up red.
4.
You can read out either track 1, 2 or 3 of a magnetic stripe (see Configuration (on
page
2 )). When a track is read out successfully, the reader beeps.
5 Configuration
The MiCard Magnetic Card Reader works without any additional configuration,
however, some "advanced" options are available.
You can see the connected MiCard readers under uniFLOW Server Configuration >
Connections > Agents/Terminals > MEAP & miniMIND > List view.