UniFlow MiCard PLUS-2 V2, Installation Manual

Page: 14 / 22

MiCard PLUS-2 V2
2
With the Configuration Utility (on page 3 ) the beeper volume can be set to one of four
different volumes: off, low, medium and high.
4 LED Status
The table below shows the LED status information given by the MiCard PLUS-2 V2.
Status Green LED Yellow LED Red LED
Booting up. 2 x flashing
MiCard PLUS-2 V2 is
ready for operation. on
MiCard PLUS-2 V2 is not
ready for operation. flashing
Authentication OK. on (ca. 2 sec.)
5 Compatibility

Canon MEAP devices (V3.0.8 onwards)

Canon SFP MEAP devices (V1.0.2 onwards)

Canon CMFP devices
The MiCard PLUS reader does not work with CMFP devices by default. In order to
make it compatible, the reader requires a certain firmware. Please refer to the
NT‐ware Knowledgebase ‐ MiCard PLUS to CMFP Connection (MOMKB-713
(
https://web.nt-ware.net/its/browse/MOMKB-713 )) for details. Please note that
registration is required in order to access the NT-ware Knowledgebase.

Canon imageFORMULA ScanFront devices

microMIND V2 (since firmware version 2.0.5)

uniFLOW

uniFLOW Desktop Scan Client (requires uniFLOW 2018 LTS or higher)

uniFLOW Embedded Applet for Hewlett-Packard V1.2 or higher

uniFLOW Embedded Applet for Samsung

uniFLOW Embedded Applet for Océ Large Format Printers