Uniflex UA 4, Operation Manual

Page: 31 / 52

Operation
UNIFLEX-Hydraulik -
32 – www.uniflex.de
5.4 Re-starting the device
To re-start the device, use the same operating sequence for starting the
device (Section 5.2).
5.5 Operation mode
The device has one operation mode:

Manual
Figure 5-4 Operating panel
1 ‘Close tool’ pushbutton
In the manual operation mode,

lower the push ram
by pressing the button

'Close tool’ pushbutton ' (1)
When the crimping dimension has been
achieved or the button is release, the comprssion
die will automatically return to the top (automatic
return stroke).
1