UniFi USW-16-POE Quick Start Manual Download Page 12

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operations of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand

Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are
applicable to it.

WEEE Compliance Statement

Declaration of Conformity

Online Resources

USW-16-POE Quick Start Guide

Summary of Contents for USW-16-POE














Reviews: