Uniden XS215, Owner'S Manual

Page: 10 / 36

10
GETTING STARTED
You can mount your phone directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting
screws into the wall.
• Mount your phone within reach of a working phone jack.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1 cm) with anchoring devices suitable for the wall material where the base unit
will be placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring device),
8.5 cm apart.
Allow about 3 mm between the wall and screw heads for mounting the phone.
2) Align the mounting slots on the base with the screw heads. Then push in and down
until the phone is firmly seated.
DIRECT WALL MOUNTING
XS215.Qx 10/21/03 5:45 PM Page 10