background image

34

Talk.and.Standby.Times

With average use, your handset battery provides approximately 6 hours of talk time and approximately 2 days 
(XS45) or 6 days (XS45+) of standby time. When your handset is not being used and is left off of the charging 
cradle the battery will gradually discharge. You can achieve optimum battery life and performance by returning the 
handset to the charging cradle after each use. If the handset is left off of the charging cradle, the actual talk time 
duration will be reduced respective to the amount of time the handset is off of the charging cradle.

Low.battery.alert

When the battery pack is very low and needs to be charged, the phone is programmed to 
eliminate functions in order to save power. If the phone is not in use, LOW BATTERY appears 

on the LCD and none of the keys will operate. During a call, LOW BATTERY flashes and the 

handset beeps. Complete your conversation as quickly as possible and return the handset to the cradle for charging.

Note:.Information.stored.in.the.phone's.memory.will.be.retained.for.30.minutes.after.the.battery.pack.
is.removed..This.includes.all.setup.information,.last.number.dialed,.speed.dial.memory,.and.the.CID.
list.

Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum 
performance, be sure to return the handset to the cradle after a telephone call.

1 OM.indd   34

21/5/08   10:35:40 AM

Summary of Contents for XS1415













































Reviews: