Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone’s channel for clear operation. This function works only when the phone is in
use. Press the
channel
key. The
talk/batt low
LED flashes, indicating the phone is
changing to another channel.
Find Handset
To locate the handset, press the
find handset
key on the base. The handset beeps
for 60 seconds. The handset stops beeping when any key is pressed, when it is
returned to the base, or when the
find handset
key is pressed. The handset also
stops beeping when an incoming call is received.
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not in use,
the
talk/batt low
LED flashes when the battery pack is low. If the phone is in use, the
talk/batt low
LED flashes and the handset beeps. Complete your conversation as
quickly as possible and return the handset to the base for charging.
NOTE:
• Even when the battery pack is not being used, it will gradually
discharge over a long period of time. For optimum performance, be
sure to return the handset to the base unit after each telephone call.
• Last number dialed and numbers stored in memory locations (including
RocketDial), are retained for up to one minute while you replace the
battery pack.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts
on the handset once a month.
Dampen a cloth with plain water.
Gently rub the damp cloth over the charging contacts
until all visible dirt is removed.
Dry the contacts thoroughly before returning the handset
to the base.
Caution: Do not use paint thinner, benzene, alcohol, or other chemical
products. Doing so may discolour the surface of the telephone and damage
the finish.
Using the Speed Dial Memory and RocketDial
Storing Numbers in Speed Dial/RocketDial Memory
Your cordless phone can store up to ten numbers in the speed dial memory. An
additional number can be stored in the one-touch RocketDial memory. Store your
most frequently dialed number in the one-touch RocketDial location.
1. When the phone is in standby mode, press the
memory
key. The
talk/batt low
LED flashes.
2. Use the keypad to enter the phone number; each number can be up to 20 digits.
[6]