50
Registering Repeaters
If you are having trouble with a repeater or if you want to replace one,
you need to register the repeater to the base.
TIP: Connect the repeater close to the base for easy access to the
necessary buttons and indicators. Locate the repeater in the desired
position after registration is complete.
On the base, open the menu and select
1.
Register Handset
.
On the bottom of the repeater you
2.
want to register, press and hold the
registration button until the
LINK
light
blinks rapidly.
In about 90 seconds, the
3.
LINK
light on
the repeater will turn on. The repeater has
been registered to the base.
If the
LINK
light doesn't turn on, try these steps again.
- Only register one repeater at a time. If more than one repeater
is in registration mode at the same time then they can interfere
with each other.
- Only register a repeater to one base at a time. If more than one
base is in registration mode at the same time then you can't
control which base the repeater registers to.
