Uniden XDECT SSE45, Owner'S Manual

Page: 25 / 40

25
To... Press...
transfer a call
1.
Hold/Transfer
from the menu.
2. The system puts the call on hold. Select the
handset you want to page, or All to page all
handsets.
When the other handset accepts the call, you’ll be
disconnected, but you can join the call again.
cancel a transfer
TALK/FLASH
to return to the call.
accept a transferred call
TALK/FLASH
to answer the page and speak to the
other handset. Then, press
TALK/FLASH
to speak to
the caller.
Call Transfer
Intercom
•
Whenever the phone is in standby, you can make an intercom call between handsets
without using the phone line.
•
You can make an intercom call from any handset, but only two handsets can be in
an intercom call at any time.
•
If an outside call comes in during an intercom page, the phone cancels the page so
you can answer the incoming call.
• If an outside call comes in during an intercom call, press
TALK/FLASH
to hang up the
intercom call and answer the outside call.
To... Press...
make an intercom page
TALK/FLASH
to get the dial tone and then select
Hold/
Transfer from the menu. Select the station you
want to talk with, or All to page all stations. When
another handset accepts the page, you will be in
an intercom call.
cancel a page
END/CLEAR.
answer an intercom page
TALK/FLASH
.
leave an intercom call
END/CLEAR
. Both handsets return to standby.
Using Voice Message Notification
•
If you subscribe to a voice mail service, your phone can notify you when you have
a new message. This feature supports Frequency-Shift Keying (FSK) notification.
The voice mail service provided by your telephone service provider is
independent from the built-in answer machine of the SSE45. Contact your voice
mail provider for information.
•
Depending on your telephone service provider, when you have new voice mail
messages, you may be alerted in the following ways:
- the display may show a message icon, (if your phone has an LCD display),
- the dial tone will sound different (you will hear an interrupted dial tone), and/or
- the charge LED on the Handset will flash (Flashing Message Indicator).