22
USING SPECIAL FEATURES
Adjusting the Base Ringers
The visual ringer blinks for the following conditions:
•
Incoming call - outside line
•
Incoming call - page
You can change the brightness of the base visual ringer. The
VISUAL RINGER
switch is on
the right-hand side of the base. Slide the switch to HIGH, LOW, or OFF (It doesn’t affect
the audio ringers).
Audio Ringer
The
RINGER
key is also on the right-hand side of the base. Each time you press the key, it
will cycle through 4 ringer tones and 2 melodies.
The Audio Boost feature enables you to increase the earpiece volume for normal and
intercom calls.
1. During a call, press
BOOST
.
The BOOST icon is displayed on the screen.
2. Press
VOL UP/DOWN
repeatedly to increase or decrease the volume.
•
You can silence the ringers on the base and all handsets at the same time. It doesn’t
affect the visual ringers.
Using the Audio Boost
DND (Do Not Disturb) Mode
Visual Ringer
Real Time Slow Talk
With the
Real Time Slow Talk
feature, you may listen to the other person’s voice at a
speed that is slower than normal.
1. During a conversation, press
SLOW
to slow down the speed of the other person’s
voice.
2. Press
SLOW
again to return normal playback speed.
#
Slow Talk feature does not work during intercom and will deactivate after each call
ends and when you stop playback.
1. During message playback, press
SLOW
to slow down the playback speed.
2. Press
SLOW
again to return normal playback speed.
Playback Slow Talk
With the
Playback Slow Talk
feature, you can listen to the answering machine
messages at a slower speed than normal.
#
This feature is optimised to extend normal speech of a short nature - such as;
“Welcome to Uniden” or “Please press 1”.
#
The extension feature is not applied when the caller’s speech is already slow, or
the sentence spoken is long and continuous.
