manualshive.com logo in svg

Uniden XDECT SSE25 Series, Owner'S Manual

Share
Download
Uniden XDECT SSE25 Series Owner'S Manual Download Page 34

30

Connect the telephone cord to the wall jack. Hook the other  side of 

4) 

the telephone cord into the notch OR tuck the excess cord into the 
open space in the bracket.

5) Place the mounting slots over the pins 

on the wall plate, and slide the base 
down to lock it into place.

removing the Wall Mount Bracket

The bracket release latch is between the tabs that 
snap into the base. Turn the base over and pull the 
release latch towards you (away from the base). 
Slide the wall mount bracket straight off. 

If you don't have a 

wall plate:

You can

 

-

 mount 

the base on any 

wall capable of 

supporting its 

weight. Be sure 

to use the proper 

type of anchoring 

device for the wall 

material.
You'll need two 

 

-

#10 screws with 

a minimum length 

of 35mm (not 

supplied).
Insert the screws 

 

-

into the wall 

vertically, 100mm 

apart. Leave the 

screw heads 3mm 

away from the wall 

to allow room for 

the base. 
Align the mounting 

 

-

slots over the 

screws and slide 

the base down into 

place.

XDECT SSE25 OM.indd   30

23/12/09   11:17:59 AM

Summary of Contents for XDECT SSE25 Series





































Reviews:

No comments

Brands by name

Popular brands

Load more brands