manualshive.com logo in svg

Uniden XDECT 8355 Series, Owner'S Manual

Share
Download
Uniden XDECT 8355 Series Owner'S Manual Download Page 38

38

Multihandset Features

 

#

To use the features in this section, you need at least 2 handsets.

You can register up to 12 handsets to a base (the 1 that comes with the 

base plus 11 additional handsets). However, only 2 handsets maximum can 

connect to a call at one time. 
You must register accessory handsets to the base before using them. 

(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a 

Not Registered

 message. For 

registration instructions, see page 49 or see the accessory handset 

manual.
If a handset was ever registered to a base, you must reset it before it can 

register to a new base; see page 49, or see the accessory handset manual.

Conference Calling (Line 1)

• 

A land line call or a mobile call (1 line) can be connected in conference 

with 2 handsets and a base creating a 4 way conference.

• 

To join a call that’s already in progress, just press 

HOME/FLASH

 (to 

join a Landline call) or 

MOBILE

 (to join a Mobile call).

• 

To leave the conference call, hang up normally; the other handset 

remains connected to the call.

Conference Calling (Line 2)

A land line call AND a mobile call (2 lines) can be connected together in 

conference with up to 2 handsets and a base, creating a 5-way conference. 

• 

First, use 1 handset to dial/answer your first call (by pressing either 

HOME/FLASH

 or 

MOBILE

).

• 

Then, using the same handset, dial/answer your second call by pressing 

HOME/FLASH

 or 

MOBILE

. The first call will then be put on hold.  

 

#

If your first call is via the land line, your second call has to be via 

the mobile, and vice versa.

• 

When you are connected and talking to the second call, join both your 

calls by pressing 

MENU/SELECT

 and then selecting 

Conference

. You 

are now on 3-way conference. 

• 

Then, 1 additional handset can join this 3-way conference by pressing 

either 

HOME/FLASH

 or 

MOBILE

 to create a 4-way conference. 

• 

The base can join this 4-way conference by pressing either 

HOME 

or 

MOBILE

 to create a 5-way conference.  

 

Summary of Contents for XDECT 8355 Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands