manualshive.com logo in svg

Uniden XDECT 8355 Series, Owner'S Manual, Page: 24 / 56

Share
Download
Uniden XDECT 8355 Series Owner'S Manual Download Page 24

24

Bluetooth Setup Menu

Use the Bluetooth Setup menu to pair to a mobile phone to the XDECT 

8355 and select a mobile phone, if you pair more than one. 

Menu Option 

What it does

Make Call

Use this option to make a call through the mobile 

using the Handset or Base.

Privacy Setup

Determines which handsets will ring when a mobile 

call comes in (default = off). 

Download PB

Downloads the mobile phonebook to the base.

Remove Mobile

Un-pairs a mobile phone from the base.

When you select the Bluetooth Setup Menu, 

Add Mobile

 displays. Select 

this option to pair your mobile phone with the XDECT 8355.
Then select the paired mobile to get the options displayed below.

Menu Option 

What it does

T-coil

Turn on T-coil mode to reduce noise on hearing aids 

equipped with a telecoil (T-coil) feature. T-coil mode 

shortens talk time, so keep your battery fully charged.

Ringer Tones

Choose this handset’s ring tone for landline and paired 

mobile line. As you highlight each ring tone, the phone 

plays a sample. When you hear the tone you want, 

press 

MENU/SELECT.

Personal Ring

Turn on personal ring so you can assign a special ring 

tone to people in your phonebook. With Caller ID, this 

HS uses the assigned tone when the person calls.

Auto Talk

Have this handset answer a call when you pick it up 

from the cradle (without pressing any buttons).

Any Key Answer

Have this handset answer a call when you press any 

key on the 12-key dialpad.

Banner

Change the name used on the handset’s display.

Key Touch Tone

Have the keypad sound a tone when you press a key.

LCD Contrast

Change the contrast of the display

HD Audio

Turn HD Audio on or off.

Handset Setup Menu

You can change these settings separately for each handset.

Summary of Contents for XDECT 8355 Series

























































Reviews:

No comments