![background image](http://html.mh-extra.com/html/uniden/xdect-5135-series/xdect-5135-series_owners-manual_841506006.webp)
6
INSTALLING YOUR PhONE
1) Unpack all handsets, battery packs, and battery
covers. If any battery cover is already on the
handset, press in on the notch and slide the
cover down and off.
2) Line up the red and black wires on the battery
pack with the label inside the handset.
3) Push the connector in until it clicks into place; tug gently on the wires
to make sure the battery pack is securely connected.
4) Place the cover over the battery compartment and slide it up into
place.
5) Connect the base AC adaptor to the
ADAPTOR
jack on the rear of the
base.
6) If you have accessory handsets, connect a charger AC adaptor to
each charger's
DC IN 9V
jack and set the plug into the notch as
shown.
7) Plug the other end of each adaptor into a standard 240V AC power
outlet.
8) Place a handset in the base and any accessory handset(s) in the
charger(s) with the display(s) facing forward. The
ChARGE
light on the
handset(s) should turn on.
Charge the Battery
If...
Try...
the
ChARGE
light
does not turn on
•
reseating the handset
•
checking the AC adaptor connection
•
seeing if the outlet is controlled by a wall switch
#
Charge all handsets completely (about 15-20 hours) before using
them.