Programming Your Phone
All programming functions must be completed
when your phone is in the standby mode because
programming keys do not function while you are
on the phone.
Storing a Number in Memory
Use these keys to store a number in memory.
Note:
An error tone will sound and the
programming procedure will be canceled if more
than 20 seconds elapse between each keystroke
entry or step.
1. Remove the handset from the base.
2. Press
M
.
The
talk/batt low
LED blinks.
3. Enter the number you want
to store (up to 16 digits).
5551212
4. If a pause is needed during dialing to access a
long distance service, press
P
.
9
P
555
1212
Note:
The
P
button counts as one digit.
Pressing
P
more than once increases the
length of the pause between numbers.
5. Press
M
again.
6. Enter the memory location (0-9).
A tone indicates that the number is stored.
Storing a Mixed Number
If your phone is set up for pulse dialing, you can
store a mixed mode number so that you can easily
access long distance services.
Use these keys to store a mixed mode number
in memory.
Note:
An error tone will sound and the
programming procedure will be canceled if more
than 20 seconds elapse between each keystroke
entry or step.
1. Remove handset from the base.
2. Press
M
.
The
talk/batt low
LED blinks.
3. Enter the number to be dialed in pulse mode.
555 1212
4. Press
on the handset.
5. Enter the number to be dialed in tone mode.
3300
6. If a pause is needed during dialing to access a
long distance service, press
P
.
P3300
Note:
The
P
button counts as one digit.
Pressing
P
more than once increases the
length of the pause between numbers.
7. Press
M
again.
8. Enter the memory location (0-9).
A tone indicates that the number is stored.
Dialing a Stored Number
To dial a number previously stored in memory,
follow these steps:
1. Remove the handset from the base.
2. Press
T
.
3. Press
M
.
4. Press the memory location number (0-9).
Chain Dialing
On certain occasions, after dialing a number, you
may be requested by the party or service you are
calling to enter a special access code, such as
when performing a banking transaction. To do
this, follow these steps:
1. Store the access code into one of the
memory numbers.
2. Dial the main number.
3. At the appropriate time, press
M
followed by
the memory location number where the access
code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory
location (0-9), follow these steps:
1. Remove the handset from the base.
2. Press
M
twice
.
3. Press the memory location number (0-9).
Note:
An error tone will sound and the erase
procedure will be canceled if more than 20 seconds
elapse between each keystroke entry or step.
10
H:...folded xc800series.vp
Thu Jul 09 15:07:53 1998
Color profile: Disabled
Composite Default screen
Summary of Contents for XC815
Page 1: ......
