Uniden XC610 Series Operating Manual Download Page 4

Battery Safety Precautions

Introduction

Caution:

To reduce the risk of fire or injury to

persons by the battery read and follow

these instructions:

Congratulations on your purchase of the Uniden

XC610 Series/XC710

 Cordless Telephone. This

phone is designed to exacting standards which
provide reliability, long life, and outstanding
performance.

1.

2.

3.

4.

5.

6.

Use only the appropriate type and size Battery
Pack specified in this Operating Guide.

Do not dispose of the Battery Pack in a fire. The

cell may explode.

Do not open or mutilate the Battery Pack.
Released electrolyte is corrosive and may cause

damage to the eyes or skin. It may be toxic if
swallowed.

Exercise care in handling the battery in order not

to short the battery with conducting materials
such as rings, bracelets, and keys. The battery
or conductor may overheat and cause burns.

Charge the Battery Pack provided with or

identified for use with this product only in

accordance with the instructions and limitations
specified in the instruction manual provided for
this product.

Observe proper polarity orientation between the

Battery Pack and battery charger.

SAVE THESE INSTRUCTIONS

Note:

This Series of phones is available in designer

colours which are designated by different model
name letter-suffixes. Accordingly, this manual
describes the operation of the

XC610 

I - Ivory

 colour

XC610 S - Sage Green colour
XC610 C - Charcoal Gray colour
XC610 R - Bordeaux Red colour

and the XC770

- Ivory colour Only.

Features

 Channels

.

Random  Code™  Digital 

l

Security

Ultra Clear Plus

.

l  

AutoTalk™

.

 Memory

l

  K e y

l

AutoSecure™

Handset Ringer/Volume

Con trols

Pulse/Tone Dialing

AutoStandby™

1 -way Page/Find Button

14 Day Battery Life

 allows you to answer a call by just

removing the Handset from the Base so you don’t
have to waste time pushing buttons or flipping

switches. 

AutoStandy™

 allows you hang up by

simply returning the Handset to the Base.

The 

UltraClear  Plus

 innovative technology, together

with 10 different channels, virtually eliminates

background noise and provides you with the best
possible reception during all of your conversations.

To protect you against misbilled calls which might

result from your phone being activated by other

equipment, 

Random Code™

 digital security

automatically selects one of over 65 thousand digital

security codes for the Handset and Base Unit. Also,
the 

AutoSecure™

 feature electronically locks your

phone when the Handset is in the Base.

To get the most from your phone, please read this
Operating Guide thoroughly.

Summary of Contents for XC610 Series





















Reviews: