Uniden XC610 Series, Operating Manual, Page: 15 / 20

PRESS THESE
YOU WILL HEAR
KEYS
Press A click similar to
Note: Change
when is
channels to help
pressed.
CHANGING eliminate
CHANNELS background
noise.
Changing Channels, Flash, and Page/Find
To change channels or access call waiting while the
phone is in use, or to use the one-way page to locate
the Handset. follow these steps:
If the call
waiting tone
Sounds.
Press
to
accept the
waiting call.
A click, a short
pause, then the
caller (if you
were on a call).
FLASH - O R - -
If you have
A click, and
finished a call
then a dial tone
and want to
make another
so you can
call, press
make a different
call.
to hang up and
get a dial tone.
PAGE/FIND
Press PAGE/
The Handset
FIND on the
will beep more
Base Unit to
than 6 seconds.
locate the
Handset.
Note: If you do not have any special phone service,
pressing might disconnect the current call.
If the above flash operation does not work,
and you have the “Call waiting” service
connected, follow your service provider’s
instruction to access or operate this feature.
Programming Your Phone
All programming functions must be completed when
your phone is in the standby mode because
programming keys do not function while you are on
the phone.
Storing a Number in Memory
Use these keys to store a
number in memory.
Note: An error tone will
sound and the
programming procedure
will be canceled if more
than 20 seconds elapse
between each keystroke
entry or step.
1.
2.
3.
Remove the Handset
from the Base Unit.
Press
The TALK/BATT LOW
LED blinks.
Enter the number you
want to store (up to 16
digits).
26
27