background image

1

17

example), press 

rEdiaL/paUsE

 to insert a 2-second pause. You can 

insert as many pauses as you need, but each pause counts as one 

digit. Press 

MEnU/sELECT

 when you’re finished.

Retrieve your messages

When you have new messages, the voice message icon (   ) appears 

in the display, and the light at the top of the handset blinks. Press 

MEssagEs

 to dial the programmed access number for this handset.

Reset message waiting indicator

The voice message icon should disappear after you listen to all your 

new messages. If it doesn’t, you can reset it manually. 

With the phone in standby, open the menu and select 

Global 

Setup

Select 

VMWI Reset

, then select 

Yes

The blinking light will turn off and     disappears.

Press 

End

.

Finding a Lost Handset

With the phone in standby, press 

find

 on the base. All the handsets will 

beep for 1 minute; to end the page, press 

find

 again or press any key 

on any handset.

eXPaNDING YoUr PHoNe

Compatible Accessory Handsets

Your base supports a total of six cordless handsets: the one that came 

with the base and up to five other compatible accessory handsets. The 

following accessory handsets are compatible with this phone:

DCX330 accessory handset with charger

DRX332 accessory handset with MULTIRANGE

TM

 charger

DWX337 waterproof accessory handset with water-resistant 

charger

Refer to the individual Owner’s Manuals for detailed information 

about each handset.

1.

2.

3.

4.

Setting Up MULTIRANGE Chargers

If you expand your phone system by purchasing a separate  

MULTIRANGE charger, you will have a separate manual discussing 

the charger in detail, including how it works, how to reset it, how 

to attach the wall mount bracket, etc.

Your base can support a total of 2 DRX332 MULTIRANGE chargers.

The MULTIRANGE charger extends the range of your base in all 

directions, including up and down. Each handset will automatically 

connect to the charger or the base, depending on which signal is 

stronger. 

To place a MULTIRANGE charger

Make sure you have a strong signal from the base (at least 3 bars 

in the handset display).

Put the charger at least 3 feet away from the base or any other 

MULTIRANGE charger. (If you put the charger on a different floor 

from the base, don't forget to allow 3 feet vertically, also.)

for more information, see the DrX332 owner’s manual.

Registering Handsets

The handset that came packaged with the base is already registered to 

the base for you.
However, if you purchase any accessory handsets separately, you must 

register the handsets to the base before you can use them. Handsets 

that aren’t registered display a 

Handset not registered

 message.

With the phone in standby, press and hold 

find

 on the base for 

about  seconds.

On the handset you want to register, press and hold 

#

 until the 

display says 

Handset Registering

 (about 2 seconds).  

After the handset displays 

Registration Complete

 (about 30 

seconds), press 

TaLk/fLash 

and make sure you get a dial tone.

1.

2.

3.

Summary of Contents for WXI3077


















Reviews: