[ 25 ]
ADJUSTING THE HANDSET RINGER, EARPIECE AND SPEAKER VOLUME
Handset ringer volume
Press the volume up key or volume down key (labeled as
/vol/
or
/vol/
in standby mode to select one
of three ringer volume (off, low, or high).
Earpiece and speaker volume
Pressing the volume up key or volume down key (labeled as
/vol/
or
/vol/
key) during a call will change
the earpiece volume of the handset. This setting will
remain in effect after the telephone call has ended.
Redialing from the Base
1) Press on
the
base.
2) Press
redial/p
on the base. The last number dialed from the base is redialed.
Ringer Mute
You can temporarily mute the incoming ring. When the handset is off the cradle and the
phone is ringing, press
. The incoming ring will return to the previous setting
starting with the next incoming call.
When you press volume up key (
/vol/
) in the maximum volume level or
volume down key (
/vol/
) in the lowest volume level, an error tone sounds.
Standby Mode - The
handset is not in use
and
has not been pressed.
UP354BH(WD2) OM 5/14/04 10:50 AM Page 25
