7
Connect the other end of each adapter
4.
to a 240 volt AC (standard indoor) power
outlet, and press the
POWER
button on
the front of the receiver or on the remote
control.
Make sure the
5.
Power status
lights on the
front of the receiver and each camera all
turn on.
If...
Try...
a
Power status
light doesn’t
come on
reconnecting the AC adapter
-
seeing if the power outlet is
-
controlled by a wall switch
Check the Video Signal
As soon as the receiver powers on, it
detects the camera and shows the
video on the display. The icons at the
top of the screen tell you what’s
going on with the camera and
receiver.
The table below shows the different
status icons and what they mean.
Since the icons appear based on the
state of the camera and receiver, you
won’t see all of these icons at the
same time.
1
Signal status
Channel status
Power status
lights
VOL+
VOL−
OK
UWS1113 OM.indd 7
28/9/11 10:14:40 AM
