16
Changing to a Different Camera
On the receiver, press
f
to cycle through the enabled channels from
CAM1
through
CAM4
. After
the last enabled channel, the receiver goes back to the first camera.
Each time you press
f
, the receiver goes to the next enabled channel, regardless of whether
there is a camera present on that channel. If there is no camera signal on a particular channel,
the receiver shows a black screen with the message
No Signal
.
You should only turn a channel
f
On
if you have a camera paired to that channel.
The receiver skips any channels that are set to
f
Off
in the menu.
4
3
2
1
NO SIGNAL
4
3
2
1
4
3
2
1
(Channel
CAM2
set to
Off
.)
UWS 1101 OM-Hardware 16
28/9/11 10:00:19 AM
