6
Installing the Outdoor Camera
You can mount the outdoor
camera with the stand on the
bottom (for a flat surface such as
a tabletop), on the side (for a wall),
or on the top (for the ceiling).
When you are positioning the
camera, you might want to bring
the monitor along; it’s much easier
to get the camera into the right
position when you have the display
handy.
The following tools are required:
• Electric Drill
• 5mm Drill Bit
• 15mm Drill Bit
• No. 2 Phillips Screwdriver
Mount the Camera base
1. Hold the base of the camera
stand where you want to mount it and mark the location of the screw holes.
2. Use the included screws to attach the base to the wall or ceiling. You can also
screw the base into a flat surface such as a tabletop if needed.
3. Before attaching the camera, tug gently on the stand to make sure it is securely in
place.
#
AC powered:
- The image from the intercom camera will display on the monitior all the time.
- The LIVE view and recording, in Quad mode, will include the image/video from
the intercom camera.
#
battery powered:
- The image from the intercom camera will display on the monitor only when the
intercom button is pressed (for 1 minute).
- The LIVE view and recording, in Quad mode, will not include the image/video
from the intercom camera.
Intercom
Camera
Please note there may be slight functional variations depending on how the
intercom camera has been powered (AC or Battery).
These differences are listed below.