Quick Start Guide
Uniden 160P and 165P
Configuring the UIP160P and UIP165P for PPPoE or static IP address
if you connected your phone directly to your broadband modem and did not get a
dial tone
, you might need to configure the phone to use PPPoE (Point to Point Protocol over
Ethernet) or a static IP address to connect to your Internet service provider. If you don’t have the
configuration information, contact your service provider to determine the proper settings for a
PPPoE account or a static IP.
You might have PPPoe if...
• You use DSL to connect to the Internet.
• You enter a user name and password when you connect to the Internet.
• You use a special program (other than your web browser) to connect to the Internet.
or
You might have static iP if...
• You made arrangements with your ISP to support a web server, FTP server, bulletin board,
mailing list, or other Internet server application on your network.
• You had to configure an IP address on your PC when you first connected to the Internet.
1.
Open the configuration utility
a. Connect a computer with a web browser directly to the Ethernet (LAN) port.
b. Open a web browser window. Type http://192.168.88.1 in the address bar and
press
enter
.
c. When the phone prompts you for a password, type
admin
(all lower case) and
press
enter
.
