Quick Start Guide
Uniden 160P and 165P
b. Select
enable PPPoe
, and enter the user name and password assigned to you by
your ISP.
c. If your ISP requires it, enter the service name and account name.
d. Click
Save PPPoe Settings
.
or
a. In the menu bar at the top of the screen, select
WaN Settings
. This opens the WAN
Configuration screen.
b. Select the radio button beside
Specify static WaN configuration
.
a. Enter your assigned IP Address, Subnet Mask, Gateway, and DNS Servers. If you wish, you
can also enter a host name and domain name.
b. Click
Save WaN Settings
.
3.
Let the uiP160P or uiP165P reboot
You will see a dialog box telling you the UIP160P or UIP165P must reboot to activate the
settings. Wait until the LEDs flash three times and the pwr LED stays on. The link LED should
come back on in a few seconds. If does not, make sure your your broadband modem is directly
connected to the Internet/WAN port, and reboot the phone again.
4.
activate your 8x8 service
Follow the instructions provided earlier to activate your 8x8 service.
