E-40
Uniden UM725 Radio Owner’s Manual
ACCESSING NAVIGATION
When you press the
NAVI
soft key and the following two menus will appear.
x
WAYPOINT DIRECTORY
– Displays your waypoint directory for access or editing.
This list also includes information saved by MOB and MK POS keys (MOB appears as
MOB 001, 002… MK POS appears as MARK 001, 002… if they were saved without
being edited.)
x
ROUTE DIRECTORY
– Displays your route directory for access or editing.
TO START WAYPOINT NAVIGATION.
1. Select
WAYPOINT
. The WAYPOINT DIRECTORY
appears.
2. Select the desired waypoint and press the
GOTO
soft
key to start navigating to your destination.
3. As you navigate, the screen displays your position
information.
4. When you arrive at destination, an arrival message will
be displayed and the arrival alert will sound. You can
select whether to continue or end navigation by pressing
the
END
or
CLEAR
soft keys.
If you press the
CLEAR
soft key, navigation will continue,
and once you go out of range and return to the range, the
arrival message will be displayed and arrival alert will sound
again.
UM725GBT
UM725GBT
UM725GBT
UM725GBT
UM725GBT
Note: You can stop navigation anytime by pressing the CLEAR button.
Note: Navigation cannot be started without the location information from GPS. You can operate
radio during navigation, but you cannot edit or change location information (destination
or route) during navigation.
