How It Works
16
Scan mode
You can save channels into memory and then use scan mode to monitor
those channels. When the radio detects a signal on a channel, it pauses on
that channel as long as the signal is received; when the transmission stops,
the radio will continue scanning.
11
10
08
13
12
17
15
20
14
The radio scans about
5 channels in 1 second.
When it detects a signal, the radio stays on the
channel until you press the
CHANNEL
UP
button or the
signal stops.
Resume scan
In scan mode, you can get the following information from the display (some
indicators will not always be displayed):
1 Watt
INT
Memory
Scanning Channels
01,03,05,06,07,08
07
Transmit power
last used
Channel mode
(
USA
,
CAN
adian,
or
INT
ernational)
Current
channel being
scanned
Scan list (if the
text is too long,
the line scrolls)
All scanned
channels must
be in memory
Normal scan
mode or Triple/
Dual-watch on
Using the radio in scan mode
You cannot transmit while in scan mode.
•
You must have two or more channels in memory to start a scan.
•
To save a channel into memory, select the channel, then press and
•
hold the
SCAN-MEM
button for two seconds.
Memory
will show on the
display.
UM425 VHF OM.indd 16
28/9/11 11:55:16 AM
