manualshive.com logo in svg

Uniden UM423 AM, Owner'S Manual

Share
Download
Uniden UM423 AM Owner'S Manual Download Page 14

Operation

14

AM TRANSCEIVER

Busy Channel Lockout

If the channel is already in use,

you can prevent the AM Marine Radio 

from transmitting . 

1.   Press

 [MENU/ENTER] 

three times. 

 

The BCL setting flashes. 

2.   Press any channel key on the base or  

 

 

handset to change the setting between    

 

ON or OFF.

3.   Press 

[MENU/ENTER

]

 to store the setting.

4.   Press and hold 

[MENU/ENTER]

 to exit 

 

from the menu mode. 

If a button is not pressed within 10 seconds the AM Marine Radio will automatically  

exit the Menu Mode.

Back Light

1.   Press

 

[MENU/ENTER]

 

four times. The    

 

Backlight setting flashes.

2.   Press any channel key on the base or    

 

handset change the setting between  

 

 

OFF, LO and HI.

3.   Press 

[MENU/ENTER] 

to store the 

 

setting.

4.   Press and hold 

[MENU/ENTER]

 to exit    

 

from the menu mode.

AM TRANSCEIVER

UM423 AM.indd   14

28/9/11   11:58:47 AM

Summary of Contents for UM423 AM

































Reviews:

No comments

Brands by name

Popular brands

Load more brands