Uniden UIP 160P Series, Owner'S Manual

Page: 32 / 76

[ 3 1 ] U S I N G Y O U R P H O N E
w w w . u n i d e n . c o m
USI
NG Y
OUR
P
H
ONE
Making and Receiving Calls
From the Handset
Normal Speakerphone
To make a call
Remove the handset from the cradle.
1) Press talk/flash .
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then press talk/flash .
Remove the handset from the cradle.
1) Press .
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then press .
To answer a call
Pick up the handset and press talk/flash .
(If Auto-talk is ON, the phone will automatically
answer when you remove the handset from the
cradle.)
Pick up the handset and press .
(If Auto-talk is ON, the phone will automatically
answer when you remove the handset from the
cradle.)
To hang up Press end or return the handset to the cradle (AutoStandby).
To enter a pause within
the dialing sequence When you dial the number in standby mode, press redial/p/vol/
∨
.
P
appears in the display, which represents a pause.
•To set "AutoTalk", see
page 22 or to set
"Anykey Answer" see
page 23.
•The handset
microphone is located
at the bottom of the
handset (see "Controls
and Functions" on
page 5). Position
yourself as near to the
handset as possible
and speak clearly.
•If the line is in use by
another handset(s),
"
In U se
" appears
in the display of all
registered handsets
that are not in use.
note