Uniden UIP 160P Series, Owner'S Manual

Page: 12 / 76

[ 1 1 ] S E T T I N G U P T H E P H O N E
w w w . u n i d e n . c o m
SET
T
I
NG UP THE
PH
ONE
All the LEDs will flash several times, and the PWR LED will remain on. If the
UIP160P was properly recognized by Packet8's network, the link LED will remain on.
Test your connection by making a call with the handset and browsing to a web page
from your PC. If you have any difficulty, see the Troubleshooting section.
See the User Interface Guide at www.uniden.com/voip for more information on
configuring your UIP160P.
Step 3 Activate your Packet8 Service
Once you have connected your UIP160P, you can activate your Packet8 service
• You will need your 10-digit activation code that was sent to you by email when your
Packet8 order shipped. (You can also obtain your activation code at www.packet8.net by
signing in at your account page.)
• Pick up your telephone handset and dial the Activation Service number **012-0001.
• Follow the voice instructions and enter your 10-digit activation code.
• When you enter a valid code, your account will be activated and your Packet8 phone
number will be emailed to you. This Packet8 phone number can also be found in your
account details page after signing in at www.packet8.net.