Uniden UH9060 Owner'S Manual Download Page 46 | Manualshive

Page: 46 / 56

background image

46

UNIDEN UH9060/UH9080

UHF CB Transceiver

Operation - Special Features

Alarm Mode

When a received code matches to your receiver Selcall ID the UH9060/UH9080 will
respond based on the Call Alarm mode.

Call Alarm - Auto mode (Default)

  a) Transmit an Acknowledge tone to the Caller.
  b) Emit CALL Alarm for 10 seconds only.
  c) Resume Quiet condition automatically after 20 seconds if the call is not answered.
  d) The Unit will start decoding again when the 20 second period elapsed and the call

remained

unanswered.

Call Alarm - Continue mode

  a) Transmit an Acknowledge Tone to the Caller.
  b) Initially an alarm of four successive beeps is emitted for 20 seconds and then two
      successive beeps every four seconds continuously unless answered.
  c) The Quiet Condition is never resumed.
  d) The Unit continues to check if incoming codes have your Receiver Selcall ID
      even though the Quiet Condition is already opened. When detected, it will send an
      acknowledge Tone to the caller and then resets the Call Alarm.

NOTE

For both of the above mentioned modes, transmission by using the PTT
button is possible when the

TSQ

LFRQLVÀDVKLQJ

1. Switch Off the Power.
2. Press and hold

[POWER]

and

[MENU]

. The SELCALL Settings Menu will display

(no tone will sound).
3. Press

[MENU]

repeatedly to select the Alarm mode setting - which is indicated on

the display as AL.
4. Press

[SCAN]

WRHGLWWKHVHWWLQJ7KHFXUUHQWVHWWLQJÀDVKHV

5. Press

/

to select the desired Alarm mode from AUTO or CONT.

6. Press

[SCAN]

to exit the setting.

7. Press and hold

[ENTER]

, to save and exit programming mode.

Group Call Mode

The Group Tone period can be adjusted to increase the ability to identify group calls.
Group 01 mode sets the tone period to 1 tone period (default). Group 02 mode sets the

¿UVWJURXSWRQHSHULRGWRWRQHSHULRGV

1. Switch Off the Power.
2. Press and hold

[POWER]

and

[MENU]

. The SELCALL Settings Menu will display

(no tone will sound).
3. Press

[MENU]

repeatedly to select the Group Call mode setting - which is indicated

on the display as GROUP.
4. Press

[SCAN]

WRHGLWWKHVHWWLQJ7KHFXUUHQWVHWWLQJÀDVKHV

5. Press

/

to select the desired Group Call mode from 01 or 02.

6. Press

[SCAN]

to exit the setting.

7. Press and hold

[ENTER]

, to save and exit programming mode.

«
...
44
45
46
47
48
...
»

Summary of Contents for UH9060

























































Reviews:

No comments

Related manuals for UH9060

Brand: JB.lab Pages: 56

Brand: Ericsson Pages: 16

Brand: Ericsson Pages: 70

Brand: Cobra Marine Pages: 33

Brand: Laser Pages: 8

Brand: LENCO Pages: 25

Brand: Caliber Pages: 14

Brand: Destination Audio Pages: 12

Brand: Clas Ohlson Pages: 16

Brand: Denver Pages: 7

Brand: SKYTERRA Pages: 40

Brand: Craig Pages: 4

Brand: Harken Pages: 23

ICF-CD543RMSIL - Kitchen Cd Clock Radio

Brand: Sony Pages: 2

ICF-CD553RM - Cd Clock Radio

Brand: Sony Pages: 2

Brand: Sony Pages: 2

ICF-CD523 - CD Clock Radio

Brand: Sony Pages: 2

ICF-CD523 - CD Clock Radio

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands