Operation - Special Features
33
UNIDEN UH9060/UH9080
UHF CB Transceiver
100 User Programmable RX Channels (Only for UH9080)
The UH9080 has 100 receive only channels (CH81 to CH180) which can be
programmed with frequencies ranging from 400-520MHz (in 12.5kHz steps). The extra
RX channels only appear, as part of the CB channel bank, when a frequency has been
programmed to a channel. There are three ways to programme RX channels;
1. If you know the frequency you may manually programme it to a channel.
6WRUHD3ROLFHRU)LUH $PEXODQFHIUHTXHQF\WRDFKDQQHO
8VHWKH&ORVH&DOO5)&DSWXUHIHDWXUHWR¿QGDQHDUE\VWURQJVLJQDO VWRUHWKLV
frequency to a channel.
Furthermore, the RX channels can be Alpha Tagged (given a name) if desired.
Manually Programme a RX Channel (Only for UH9080)
In CB channel mode (UHF CB channel);
3UHVV KROG
[MENU]
7KHORZHVWDYDLODEOHHPSW\5;FKDQQHOZLOOÀDVK
2. Press
/
if you wish to select another RX channel.
3. Press
[REPLAY]
WREHJLQWKHIUHTXHQF\H]GLJLWUDQJHÀDVKHV
Use or
WRVKLIWE]UDQJHE] N+]UDQJHLQ
12.5kHz
steps).
Press
/
WRVHOHFWWKHGHVLUHGIUHTXHQF\] N+]UDQJHV
4. When desired frequency is entered press
[REPLAY]
to move to Alpha Tag selection.
$FXUVRUÀDVKHVLQWKHVWDOSKDSRVLWLRQ
If you do not wish to name the channel then skip this step.
Press
/
to select the desired alpha character.
Use or
to shift between cursor positions.
:KHQ¿QLVKHGSUHVV
[REPLAY]
$ORQJFRQ¿UPDWLRQWRQHVRXQGVWRLQGLFDWHWKHQHZ
channel is programmed.
7KHFKDQQHOÀDVKHVWRHQDEOHVHOHFWLRQIRUSURJUDPPLQJRIQH[WFKDQQHOLIGHVLUHG
6. Press and hold
[ENTER]
to exit programming mode.